Hotline：08620-36453501
Your location：
The Brookfield PVS is a coaxial cylinder, controlled shear rate rheometer used in applications under pressure at temperatures where sample boil-off is a problem.
The PVS is a dynamic coaxial cylinder, controlled shear rate rheometer allowing quick and easy viscosity measurements under pressure at temperatures where sample boil-off is a problem.
The PVS can be used to simulate process conditions for small fluid samples in a laboratory benchtop environment. Applications include chemical compounds containing volatile materials, oil industry, drilling muds and fracturing fluids, processed foods, polymers and paints. Any test sample requiring absolute viscosity measurement under totally enclosed conditions is a viable candidate.
FEATURES AND BENEFITS
Portable site-to-site mobility with 1' x 1' x 2' instrument footprint
Rheovision software for automation and control of all test parameters
Designed to operate in severe environments with Hastelloy cups and bobs standard
Quick and easy to operate
Measures samples from vacuum to high pressure of up to 1000 psi
Safety relief valve included
Measures under temperature conditions: -40°C to +260°C
RTD temperature sensor on the inner cylinder surface insures accurate sample temperature
Runs test to API industry standard
LSRV measurements to 0.2 sec-1
Simulation of In-Process conditions:
Down Hole
Cooking
Blending
Reactors
Robust motor capable of speeds up to 1000 RPM
Outside cylinder rotates at shear rates up to 1700 sec-1, spindle inside remains stationary
Available with triple annulus geometry for increased sensitivity when measuring low viscosity fluids
Quick and easy setup
Complete with choice of spindle (bob), cup, Rheovision Software and computer
Industrial standards
PRINCIPLE OF OPERATION
The outer cylinder (sample cup) is driven by a stepper motor at speeds from 0.05 RPM to 1000 RPM. The inner cylinder (bob) contains an RTD probe on the surface to provide temperature measurement where the shear stress is being measured. Several cup and bob designs with different geometries are available to suit various applications.
The unique torque tube design enables the instrument to respond to minute changes in viscosity, mechanically transmitting a rotational torque signal out of the pressure containment area without friction. Thus all electronics, bearings, and other sensitive components are completely protected from the influences of both the sample fluid and its vapor.
PVS Rheometer Ranges
BOB/STATOR SAMPLE CUP | VISCOSITY RANGE cP(mPa·s) | SHEAR RATE(sec-1) | SAMPLE VOLUME(mL)* |
| PVS-B1-D-HC | 2-5M | 1.7N | 12 |
| PVS-B2-D-HC | 20-36M | 0.38N | 55 |
| PVS-B5-D-HC | 5-10M | 0.85N | 25 |
| PVS-TA5B5-D-HC | .5-1M | 0.85N | 160 |
* ± 1mL HC=Hastelloy C M=1 Million N=RPM mL=Milliliter
